manualshive.com logo in svg

KVM-TEC MASTERflex KT-6012, Manual, Page: 69 / 88

Share
Download
KVM-TEC MASTERflex KT-6012 Manual Download Page 69

kvm-tec    |    69

Misprints, errors and technical changes reserved

Misprints, errors and technical changes reserved

3.9.1 ENABLE OR DISABLE USB MEMORY UPGRADE

The USB Memory upgrade allows the user to enable or disable the memory upgrade. When 
the USB Memory upgrade is enabled, USB flash storage and external storage devices can be 
accessed via the extender. If your extender was provided with the USB Memory upgrade you 
can enable and disable at any time.
1.  Make sure the main menu is open.
2.  Press the M key. The Options Overview menu opens. The current USB Memory status is  
displayed (Enabled or Disabled).
3.  Press 1 to enable or 0 to disable the USB Memory upgrade.

3.9.2 ENABLE OR DISABLE SOUND UPGRADE

This upgrade enables analog sound transmission in both directions in CD quality.

For a description of how to enable or disable the sound upgrade, see in Chapter 3.9 „Unlock an 
upgrade.

3.9.3 ENABLE OR DISABLE VGA UPGRADE

This upgrade enables the use of VGA analog signals on the local unit.

For a description on how to enable or disable the sound upgrade, see in Chapter 3.9 “Unlock an 
upgrade.

3. EXTENDER SETTINGS

Summary of Contents for MASTERflex KT-6012

























































































Reviews:

No comments