KVM-TEC MASTERflex KT-6012, Manual, Page: 31 / 88

kvm-tec | 31
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
2. INSTALLATION OF THE EXTENDER
2.7 QUICKINSTALLATION MASTERFLEX DUAL IN FIBER
1. Connect the CON / Remote and the CPU / Local Unit to the included 12V 2A power
supply.
2. Now connect the USB cable to a USB port on your PC and connect the other end
of the USB cable to the CPU / Local Unit. Connect keyboard and mouse to the CON
/ Remote Unit.
3. Connect the CPU / Local and the CON / Remote Unit with a network cable.
4. Now connect the DVI cable to the DVI socket of the PC and the other end to the
DVI socket of the CPU / Local Unit (PC-in).
5. Now connect the DVI cable to the DVI socket of the PC and the other end to the
DVI socket of the CPU / Local Unit (PC-in 2). Then connect the monitor with the DVI
cable to the CON / Remote Unit.
6. Connect PC audio/out with the audio cable to local audio/in. Connect audio/out
via the audio cable
7. Almost done! Connect the audio cable local audio/out to the PC audio/in and
remote audio/out with audio cable to the microphone
8. Using a switch: Connect all endpoints to the switch. Ensure that all connections
have a bandwith of 1Gbit/sec. For video sharing the network has to support IGMP
snooping.
Power plug 12V 1A
Power plug
12V 1A
USB to PC
DVI in 1 from PC
DVI to Monitor 1
USB from Keyboard and mouse
OM3-Fibercable up to 500m/1640ft
OM3-Fibercable up to 500m/1640ft main link
Audio from PC
Audio to PC
Audio to speaker
Audio
from
Microfone
DVI to Monitor 2
DVI in 2 from PC
Power plug
12V 1A (redundant)
Power plug 12V12A
(redundant)