KVM-TEC MASTERflex KT-6012, Manual, Page: 29 / 88

kvm-tec | 29
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
2. INSTALLATION OF THE EXTENDER
2.5 QUICKINSTALLATION MASTERFLEX DUAL IN COPPER
1. Connect the CON / Remote and the CPU / Local Unit to the included 12V 2A
power supply.
2. Now connect the USB cable to a USB port on your PC and connect the other
end of the USB cable to the CPU / Local Unit. Connect keyboard and mouse to
the CON / Remote Unit.
3. Connect the CPU / Local and the CON / Remote Unit with a network cable.
4. Now connect the DVI cable to the DVI socket of the PC and the other end to the
DVI socket of the CPU / Local Unit (PC-in).
5. Connect the DVI cable to the DVI socket of the PC and the other end to the DVI
socket of the CON / Local Unit (PC-in 2). Then connect the monitor to the CON /
Remote Unit using the DVI cable.
6. Opt: Connect PC Audio out with the audio cable to local audio/in. Connect
audio/out via the audio cable
7. Almost done! Opt: Connect the audio cable local audio/out to the PC audio/in
and remote audio/out with audio cable to the microphone
8. Using a switch: Connect all endpoints to the switch. Ensure that all connections
have a bandwith of 1Gbit/sec. For video sharing the network has to support
IGMP snooping.
Power plug 12V 1A
Power plug
12V 1A
USB to PC
DVI in 1 from PC
DVI to Monitor 1
USB from Keyboard and mouse
Network cable CAT5e/6/7/ up to 150m/492ft
Power plug
12V 1A (redundant)
Network cable CAT5e/6/7/ up to 150m/492ft main link
Audio from PC
Audio to PC
Audio to speaker
Audio from microphone
DVI in 2 from PC
DVI to Monitor 2
Power plug 12V 1A
(redundant)