KVM-TEC MASTERflex KT-6012, Manual, Page: 24 / 88

24 | kvm-tec
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
2. INSTALLATION OF THE EXTENDER
kvm-tec | 24
2. INSTALLATION OF THE EXTENDER
2.1 UNPACKING AND CHECKING THE CONTENTS
Before using the product for the first time it should be checked for damage. In case of
damage due to transport inform the carrier immediately. Before delivery the product is
checked for its function and its operating safety.
• Make sure that the packaging contains the following content:
MASTERflex single copper
delivery content - Local (CPU)
1 x MV1 local (CPU)
1 x wall power supply 12V 1A (EU-plug or int plug))
1 x DVI - DVI cable 1,8m/5.9 ft)
1 x USB cable 1,8m/ 5.9 ft
1 x VGA - DVI cable 1,8m / 5.9 ft (opt)
2 x Audio cable 1,8m/5.9ft (opt)
delivery content - Remote (CON)
1 x MV1 remote (CON)
1 x wall power supply 12V 1A (EU-plug or int plug)
4 x rubber feet
MASTERflex dual copper
delivery content - Local (CPU)
1 x MV2 local (CPU)
1 x wall power supply 12V 1A (EU-plug or int plug)
2 x DVI - DVI cable 1,8m/5.9ft
1 x USB cable 1,8m/5.9ft
2 x VGA - DVI cable 1,8m/5.9 ft (opt)
2 x Audio cable 1,8m/5.9ft (opt)
delivery content - Remote (CON)
1 x MV2 remote (CON)
1 x wall power supply 12V 1A (EU-plug or int plug)
4 x rubber feet