60 | kvm-tec
kvm-tec | 61
3. To edit the name, groups or status of an extender, press the
I
key. The
PC Extender Detail
menu opens.
4. Use the Up and Down Arrow keys to select the name or group of the PC unit.
5. Press the
E
key to edit the selected parameter.
Example
:
There are the following 3 PC’s: Department PC, Team A PC and Team B PC. The users Alex, Blair
and Charlie should have access to the Department PC and the Team A PC. The users Danny, Em
and frankie should have access to the Department PC and the Team B PC.
To achieve this we assign each PC a different group:
Department PC: Group 1
Team A PC: Group 2
Team B PC: Group 3
Alex, Blair and Charlie are assigned to be members of Group 1 and Group 2. Danny, Em and
frankie are assigned to be members of Group 1 and Group 3.
4.6 SET UP DUAl-hEAD oR MUlTI-hEAD SYSTEMS
If you use multiple monitors with a PC then you can group individual local and remote units
together in the Multi-Head menu, making them switch as a single unit.
To group individual local and remote extenders:
1. Make sure the
Master View
menu is open (see chapter „How to access the network Settings
menu (Master View and network Mode)“).
2. Press the
M
key. The
Multi-Head configuration
menu opens.
4. nETWORK SETTInGS
4. nETWORK SETTInGS
