22 | kvm-tec
Misprints, errors and technical changes reserved
Misprints, errors and technical changes reserved
2. INSTALLATION OF THE EXTENDER
2.10 CONNECT
First select the desired connection on the main page. This will then be highlighted in blue.
In the footer you will now find:
- An info, about the currently stored entries
- The button to connect „Connect
- The option to start the connection in fullscreen mode „Fullscreen“.
If you want to use the virtual connection in fullscreen mode, activate the function by clicking on
„Fullscreen“.
Now a check mark should appear, Fullscreen is now activated.
If you are satisfied with your selection in the list and the settings, press the „Connect“ button, the
virtual connection will start..