30 | kvm-tec
kvm-tec | 31
Misprints, errors and technical changes reserved
Misprints, errors and technical changes reserved
3. EXTENDER SETTINGS
3. EXTENDER SETTINGS
3.4.4 DISPLAY THE LAST RECEIVED IMAGE „FREEZE LAST
IMAGE“
With the „ freeze last image“ function, the last image received can be displayed instead of a
black screen when the remote extender (CON) is disconnected from the local extender (CPU).
To show that it is the last image received, the frame of the image will blink red.
To enable or disable the „Freeze last image“ function: 1. from the Extender Settings menu,
press the R button. The Remote Settings menu is displayed.
Press the S button to enable or disable the function.
Press ESC to return to the main menu.
Press I to enable or disable the function.
Press ESC to return to the main menu
Main Menu
3.4.5 USB EMULATION MODE
When this mode is set, the local extender emulates a keyboard and mouse always connected
to the PC. The result is switching from one PC to another PC without any switching delay.
Emulation Mode is restricted to mouse and keyboard only.
3.4.6 POWER REDUNDANCE ALERT AND LINK REDUNDANCE
ALERT
Our FLEXline, Masterflex and Maxflex single devices are redundant. Should one port fail, the
other port immediately takes over. In such a case you will receive an alarm and can see which
port has failed.
Power Redundance Alert (Only for devices with two DC sockets):
„SEC POWER LOST“ / „PRIM POWER LOST“
Link Redundance Alert (Only for single devices with two RJ45 jacks):
„PRIM LINK LOST“ / „SEC LINK LOST“ / „BOTH LINK LOST“
Oder
„SEC LINK ERROR“ with active redundancy
„PRIM LINK ERROR“ with active redundancy.
