52 | kvm-tec
kvm-tec | 53
4. Network SettiNgS
4. Network SettiNgS
4.6 INSTALLING DUAL-hEAD OR MULTI-hEAD SYSTEM
If you are using multiple monitors with one Pc, you can combine individual local/cPU and
remote/con units in the multi-head menu so that they can be switched as one unit.
Individual grouping of local (CPU) and remote (CON) extenders:
1. Make sure that the
Master View menu
is open (see chapter „network - networking“).
settings - „Master View and network Mode“)
2. Press
M.
The Multi Head configuration menu opens.
3. Press the
A
key. the
multi-head detail
menu opens.
• Press the
R
key to remove an extender from the multi-head set.
• Press the
Q
key to exit.
4. Press the
A
key to add individual extenders. the extender type is automatically determined
once the first extender has been selected.
5. Press the
E
key to edit the multi-head set name of max. 16 characters.
Summary of Contents for 6502
Page 36: ...70 kvm tec 11 Notes ...
