32 | kvm-tec
kvm-tec | 33
3. MaIn MEnU & sETTInGs
3. MaIn MEnU & sETTInGs
3.4.6 oVErlaY
The following modes can be selected by pressing the „N“ key or by selecting the arrow keys:
SCREEN „Overlay “
• PERMANENT
With this setting, the names of the connected units are permanently displayed.
• FOLLOW RED FRAME
With this setting, the names are only displayed if the red frame is active.
• OFF
No names are displayed with this setting.
3.4.7 VIDEo sYnc sETTInG
Pressing the „V“ button or selecting the arrow buttons selects the Video Sync Settings menu.
SCREEN „Video Syny Setting “
This feature can be used to determine the control loop for video synchronization.
The following modes can be used:
• HARD - key „H“
Rapid rate of regulation
• MEDIUM - „M“ button
Mean rate of regulation
• SMOOTH - „S“ button
Slow speed of regulation
