KVH Industries TracVision TV6 User Manual Download

Page: 94 / 104

TracVision TV5 User’s Guide

103

Maintenance

Preventive Maintenance

The following tasks should be performed periodically to help maintain
peak performance:
• Vacuum the vents on the TV-Hub. Air needs to flow through these

vents to cool the electronic components and prevent overheating.

Figure 9-1 Vents on TV-Hub

• Clean the outside of the antenna with fresh water to remove grime.

Dirt buildup can affect reception of satellite signals. You may use
mild detergent, but avoid abrasive cleansers and high-pressure
water.

• Inspect the cable connections at the TV-Hub for any wear and tear.

Repair any damaged cables.

• Ensure the system is running the latest software version. See

“Updating the Software” on page 106

for details. Also make sure

the TV-Hub’s satellite library is up to date. See

“Updating the

Satellite Library” on page 104

for details.

Summary of Contents for TracVision TV6









































































































Search results

Summary of Contents for TracVision TV6

Reviews:

Related manuals for TracVision TV6

Brands by name

Popular brands

KVH Industries TracVision TV6, User Manual

Search results

Summary of Contents for TracVision TV6

Reviews:

Related manuals for TracVision TV6

Brands by name

Popular brands