TracVision TV5 User’s Guide
55
Satellite Settings
Selecting a Satellite Group
The TV-Hub comes preloaded with some of the most popular groups
of satellites. To select one of these preset groups for tracking, or to
select a custom group that you created yourself, follow these steps:
1.
On the Satellites page of the web interface, set Satellite Mode to
Group
.
Figure 6-3 Preset Satellite Groups (Example)
2.
Choose a satellite group from the list. (This list will vary
depending on your system’s configuration.) All preset groups
are listed below.
Important!
KVH recommends that you run the Setup Wizard whenever you need
to change the configuration of your system (especially if you need to
change your satellite TV service or receiver equipment). The Wizard
will guide you through all of the necessary configuration steps,
including satellite selection. You can launch the Setup Wizard from the
web interface (go to Settings > General Settings).
