2-2
A Guide to TracVision S3
2.1
Choosing the Best Location
•
Since the TracVision antenna requires a clear view
of the southern sky to receive satellite signals, the
ideal antenna site has an unobstructed view of the
horizon/satellite all around.
•
Keep the antenna clear of any obstructions on the
roof (e.g., air conditioners).
The antenna requires a
15º to 75º look angle to receive satellite signals.
•
Consider the location of the antenna relative to the
location of any equipment or necessary wiring
within the vehicle.
•
For best operation, mount the antenna on a
horizontal surface.
2.2
Mounting the Antenna Unit
The following instructions will result in a secure, effective
installation and trouble-free operation of your TracVision S3.
Table 2-2 lists the materials provided in the TracVision S3 kitpack.
Most of these components will be used in the installation process.
Part
Qty.
KVH Part No.
RF F-connector
1
23-0170
Tie-wrap
5
22-0013
Flash kit cable and adapter
1
02-1029
Clam shell ventilator
1
19-0230
1
⁄
4
"-20 x
5
⁄
8
" hex screws
4
14-0250-0010
1
⁄
4
" flat washers
4
14-0251
Table 2-2
Kitpack Contents
Always lift the Antenna Unit by
the gray baseplate, never by the
radome or any portion of the
antenna assembly!
Blocked!
TracVision Antenna
Air Conditioner
Vehicle Roof
Figure 2-1
Antenna Blockage