TracPhone V7 User’s Guide
33
Chapter 3 - Configuration
Resetting the System to Factory Conditions
Follow the steps below to reset the TracPhone system to its original
factory configuration.
1. Press MENUS until the display shows
“CONFIGURATION.”
2. Press ACCEPT.
3. Press MENUS until the display shows “FACTORY
RESET.”
Resetting the system clears all RF radiation hazard zones. The
antenna will be able to transmit in any direction until you
reprogram the hazard zones into the antenna.
CONFIGURATION
NEXT MENU ACCEPT
BRIGHTNESS= HIGH
NEXT ITEM CHANGE
FACTORY RESET= NO
NEXT ITEM CHANGE
