KVH Industries FB250, User Manual

Page: 39 / 268

Chapter 2: Getting started
26 Connecting a computer
Connecting a computer
Before connecting to the LAN interface
For the LAN interface to work without any further setup, the connected
computer must be set up to obtain an IP address and a DNS server address
automatically.
To check this on your computer (Windows XP), do as follows:
1. Go to Start > Settings > Control Panel > Network Connections .
2. Right-click on the LAN connection you want to use.
3. Select Properties .
4. Highlight Internet Protocol (TCP/IP) .
5. Click Properties .
6. Make sure that the following is selected:
• Obtain an IP address automatically
• Obtain DNS server address automatically
Important Notice About Your Data Connection
To prevent inadvertent airtime usage, the user must disconnect the data
connection when not in use. If the data connection is not properly
disconnected, the computer may dial out on its own, which could result in an
unintended airtime charge. KVH accepts no responsibility if this occurs. It is
the vessel owner's responsibility to ensure that the TracPhone system is
correctly interfaced with the vessel's computer(s).