Crate packaging
38
Fitting the rotors to
the lift arms
Fit both rotors to the lift arms.
Use a brush to grease the bearing shaft.
Push the disc onto the bearing shaft.
Push the rotors and bearing housing onto the bearing shaft.
Push the ring onto the bearing shaft.
Secure the ring with a dowel pin.
Drive in the dowel pins at 90° to each other.
No.
Quantity
Part
1
2
Lift arms, fitted to main frame
2
2
Bearing housings, fitted onto rotors
3
2
Ring
4
2
Dowel pin, large
5
2
Dowel pin, small
6
2
50 x 62 x 3 washers
Bearing shaft
Bearing housing
Ring
Dowel pins
Washer for bearing shaft
Lift arm
Drive in the
dowel pins at
90° to each other.
