Maintenance
90
Lubrication points
for grease
Before applying the grease gun
clean lubricating nipples and
grease gun attachment fitting.
Working with a
grease gun
Lubricate the bearings with one or two presses of the grease gun. If
you feel resistance at the second press, do not press a second time.
Too much grease will force the bearings apart. Dust and dirt can
penetrate into the bearings. This leads to premature wear.
Lubricate the places listed in the illustration as follows:
•
after 50 hours of operation.
•
before and after the season.
•
each time after cleaning with a high-pressure cleaner.
Attachment carrier and
steering
Bearing housing
4x lift arm bearings
Transport chassis
4x tandem axles [+]
Steering rod
Steering
2x lifting cylinder, lower
side
Rotor chassis
Summary of Contents for Vicon Andex 724
Page 107: ...EC Conformity Declaration 107 ...
Page 108: ...EC Conformity Declaration 108 ...
