Maintenance
83
Maintenance
Safety
The following applies to all servicing work:
Observe the safety information
Observe the safety information. Disregard for safety information
can lead to serious or fatal injury. See chapter »Safety«, page 6.
Requirements for maintenance work
Only perform the maintenance operations if you have the required
expert knowledge and suitable tools. The absence of technical
knowledge or suitable tools can cause accidents and injuries.
Protect the machine against unintended starting
The following conditions must be observed for carrying out repairs
and maintenance work and rectifying malfunctions on the machine
when it is coupled:
•
Switch off the tractor PTO shaft drive.
•
Switch off the tractor engine.
•
Remove the ignition key.
Serious accidents may be caused if the machine starts accidentally.
Use OEM replacement parts
Many components have special properties that are essential for the
stability and correct operation of the machine. Only spare parts and
accessories supplied by the manufacturer have been tested and
approved. Other products may adversely affect the correct
operation of the machine and safety. The use of non-OEM
replacement parts renders the manufacturer's guarantee null and
void and frees the manufacturer from all liability.
Secure moving parts
Moving parts must be secured with lifting gear against sliding,
folding or swivelling. Otherwise, serious injury to persons or
damage to the machine may be caused as a result.
Disconnect electrical connections before performing welding
work
Disconnect all electrical connections from the tractor when carrying
out welding on the hitched machine. Otherwise, electrical and
hydraulic systems will be damaged as a result.
Summary of Contents for Vicon Andex 724
Page 107: ...EC Conformity Declaration 107 ...
Page 108: ...EC Conformity Declaration 108 ...
