Preparations on the field
65
Bringing the
machine into the
work position
After road transport, the machine is brought into the work position on
the field. Follow the handling instructions below:
Shutting the machine
down
Move the machine onto ground that is as flat as possible.
Secure the tractor against rolling away, shut off the engine and
remove the ignition key.
Removing the tine
guards
Remove the 6 tine guards and place them in the 2 holders to the
left and right of the main frame.
Secure the tine guards in their holder. Do so by inserting the safety
splint, which is attached to the holder, through the eyelet in the
holder.
Use the tractor's single-acting hydraulic control device to move the
machine from transport to work position.
Tine guard holder
Firmly secure the accessories
Accessories not in use must always be stowed and secured in the
holders provided. When the machine is in motion, unsecured
accessories can come loose. Damage to the machine and serious
or fatal injury may be caused as a result.
Summary of Contents for Vicon Andex 724
Page 107: ...EC Conformity Declaration 107 ...
Page 108: ...EC Conformity Declaration 108 ...
