Crate packaging
21
Fitting the deflector
bar
Pre-assemble the bottom bearing shell on the left-hand side (see
illustration detail C).
Insert the left deflector bar into the rear transverse frame and place
it in the bearing shell.
Fit the top bearing shell.
Fit the spring and secure with a split pin (see illustration detail B).
Pre-assemble the bottom bearing shell on the right-hand side (see
illustration detail C).
Insert the right deflector bar into the rear transverse frame and
place it in the bearing shell.
Fit the top bearing shell.
Fit the spring and secure with a split pin.
A
B
C
B
A
C
C
No.
Quantity
Part
1
2
Deflector bar
2
4
Bearing shells
3
2
Pressure springs
4
1
Swath former
5
1
Swath former carrier
