Kverneland VF6585 Operating Manual Download

Page: 81 / 102

Maintenance

General

This information relates to general maintenance work. For any
maintenance work, the machine must be in the work position and be
secured in place. If the transport position is required, find the relevant
information.



Lower the machine to the work position.



Secure the machine against rolling away by using chocks.

Direction information

Direction information (right, left, front, rear) is given in relation to the
direction of travel.

Rotary direction is defined as follows:

•

Rotary direction right = clockwise.

•

Rotary direction left = anticlockwise.

•

Rotation about a vertical axis, viewed from top to bottom.

•

Rotation about a horizontal axis, viewed at right angles to the
direction of travel, from left to right.

•

The rotation of screws and nuts, etc. is always viewed from the
operating side.

Front

Left

Right

Rear

Top

Bottom

Rotary direction right

Summary of Contents for VF6585







































































































Search results

Summary of Contents for VF6585

Reviews:

Related manuals for VF6585

Brands by name

Popular brands

Kverneland VF6585, Operating Manual

Search results

Summary of Contents for VF6585

Reviews:

Related manuals for VF6585

Brands by name

Popular brands