Preparations on the field
60
Preparations on the field
Safety
The following applies for all preparations on the field:
General
The following work steps are described in this section:
•
»Lowering the machine to the work position«
•
•
»Folding down the deflector bar«
•
Observe the safety information
Observe the safety information. Disregard for safety information
can lead to serious or fatal injury. See chapter »Safety«, page 6.
Switch off the tractor and secure it
Before you dismount:
Switch off the tractor.
Remove the ignition key.
Secure the tractor against rolling away.
An unsecured tractor can run you over or trap you. Serious or fatal
injury may be caused as a result.
Secure the machine
Secure the machine against accidental starting and rolling away.
Use wheel chocks. The machine must stand on a level, firm and
secure surface and be supported during the work, if necessary.
Unsecured or non-supported machines can cause accidents.
Serious or fatal injury may be caused as a result.
No persons in the working area
Ensure that no persons are present in the slewing and working
area of the machine. Persons could be caught by the machine
within this area. Serious or fatal injury may be caused as a result.
Close the ball valve
Close the ball valve before adjusting. If the ball valve is open and
there is an operating error, the machine may drop or swing out
unexpectedly. Otherwise, damage to the machine and fatal
personal injury may be caused as a result.
Observe the slewing process
Observe the rotors during the slewing process. If the machine
behaves unusually during the process, stop immediately to avoid
damage.
Summary of Contents for VF6585
Page 100: ...EC Conformity Declaration 100 ...
