Delivery and assembly
31
PTO shaft length
The length of the PTO shaft was selected at the factory to suit almost
all types of tractor. Only in exceptional cases is a correction of the PTO
shaft length required on individual tractors. Check the length of the
PTO shaft on each tractor prior to first use.
A manufacturer's operating manual for the PTO shaft is enclosed. This
includes detailed information on the relevant version of the PTO shaft
and must be observed.
Safety
Checking the length
of the PTO shaft
Couple the machine to the tractor without the PTO shaft.
Lower the tractor's lower link.
Set the combination (tractor and machine) to the smallest steering
angle.
Switch off the tractor and secure it against rolling away.
Switch off the tractor and secure it
Before you dismount:
Switch off the tractor.
Remove the ignition key.
Secure the tractor against rolling away.
An unsecured tractor can run you over or trap you. Serious or fatal
injury may be caused as a result.
Check the angle of lock
The PTO shaft has a wide hinge joint giving the tractor a steering
angle of up to 80°. Make sure that the PTO shaft is not damaged
during sharp cornering. The machine may be damaged as a
result.
Correct length
Check the PTO shaft length at the tightest steering angle. A PTO
shaft that is too long must not be used. Otherwise, damage to the
drive bearings on the tractor and machine may be caused as a
result.
Summary of Contents for VF6585
Page 100: ...EC Conformity Declaration 100 ...
