Getting to know the machine
28
Function
overview
The table below provides a summary of the functions. Be sure to
follow the other instructions and note the safety information in the
operating manual.
Steering
Machine position
Function
•
Single-acting hydraulic control
device on the tractor.
Transport
•
Machine in work position.
•
Switch off the PTO shaft drive.
•
Clean the machine.
•
Remove outer tine arms for
transport.
•
Use the single-acting hydraulic
control device on the tractor to
move the machine to the
transport position.
•
Remove inner tine arms for
transport.
•
Single-acting hydraulic control
device on the tractor.
Work position
•
Use the single-acting hydraulic
control device on the tractor to
release the lift arm locking
mechanism.
•
Pull the cable on the mechanical
lock and keep the cable
tensioned.
•
Fold the rotors in fully using the
single-acting hydraulic control
device on the tractor.
•
Single-acting hydraulic control
device on the tractor.
Headland
•
Using the single-acting hydraulic
control device on the tractor,
raise both rotors to the headland
position, and lower them again
after travelling on the headland.
•
Single-acting hydraulic control
device on the tractor.
Single rotor operation
•
Remove the left side shaft.
•
Raise the machine to the
transport position using the
single-acting hydraulic control
device.
•
Pull the control cable on the right
transport lock.
•
Lower the right rotor using the
single-acting hydraulic control
device on the tractor.
Summary of Contents for VF6585
Page 100: ...EC Conformity Declaration 100 ...
