background image

Safety

14

Safety rules

General recommen-

dations

Before starting up, check that the machine is not endangering any 
persons and that the protection and safety devices (e.g. guards, 
hoods, warning labels, etc.) are in place and functional.

Before starting work, familiarize yourself with all the parts, controls 
and functions of your machine. Once you have started, it is too late.

If an operating incident occurs: 

Shut down the machine immediately. 

Identify the cause of the incident. 

Carry out repairs out before starting up the machine again.

No work should be carried out on the machine delivered unless:

all measures have been taken to prevent the machine starting up 
again accidentally (e.g. PTO and/or hydraulic hoses uncoupled, 
tractor engine switched off),

chocks have been placed under the frame to prevent the risk of the 
frame descending,

the vehicle has been immobilized using the appropriate systems.

Before getting off the tractor, lower the machine onto the ground. 
Apply the hand brake and remove the ignition key.

No one should stand between the tractor and the machine unless the 
vehicle is immobilized (hand brake, chocks, etc.), the engine is 
switched off and the ignition key removed.

Summary of Contents for Qualidisc Farmer








































































Reviews: