Kverneland Kultistrip User Manual Download

Page: 54 / 56

Declaration of conformity

In accordance with

directive 2006/42/EC

We,

Kverneland Group Les Landes Génusson SAS
9, rue du Poitou



FR-85130 Les Landes Génusson

declare under our sole responsibility that the product

to which this declaration relates, meets the relevant health and safety
requirements in EC Directive 2006/42/EC.

To give effect to the health and safety requirements specified in the EC

Directive, the following standards have been taken into account:

•

ISO 12100-1:2003

•

ISO 12100-2/2003

•

ISO 4254-1/2009

Kverneland Group Les Landes Génusson S.A.S
9 rue du Poitou
85130 LES LANDES GENUSSON
France

Les Landes Génusson, 02-11-2013

Hasan Kesek
Chairman and authorised EC representative

KULTISTRIP

EC Marking identification plate

Kultisrip and accessories

Summary of Contents for Kultistrip

























































Search results

Summary of Contents for Kultistrip

Reviews:

Related manuals for Kultistrip

Brands by name

Popular brands

Kverneland Kultistrip, User Manual

Search results

Summary of Contents for Kultistrip

Reviews:

Related manuals for Kultistrip

Brands by name

Popular brands