Security
12
Maintenance
No work should take place within the turning circle of the tractor/tool
assembly, unless the brakes or immobilisation system have been
engaged.
When changing parts on the machine, you should pay attention to all
parts with sharp edges or corners. We recommend that safety
equipment is worn (hard hat, safety shoes, gloves, etc.)
For machines fitted with folding extensions, you must follow the
instructions in this user manual for assembly, disassembly and
adjustment.
It is strictly forbidden to disassemble springs used as safety devices
for working parts: This operation must only be performed by
specialists.
Regularly check that bolts are tight, tyre pressures are correct and the
hydraulic circuit is in good condition.
Before doing any welding, disconnect the electrical boxes (where
present) and disconnect the tractor’s alternator and battery, if the
tractor is hitched.
Never direct a high pressure cleaner jet straight at bearings, the
hydraulics, electrical boxes or other sensitive machine components
(you could damage them). Take care with splashback from the jet on
certain surfaces.
