Kverneland IsoMatch Tellus Go Manual Download

Page: 36 / 89

Initial start up

Initial start up

Start up Wizard application for IsoMatch Tellus GO

The startup wizard will appear during the initial startup of the IM Tellus GO. The startup wizard will give

the user the ability to adjust general settings like language-, time zone-, time/date-settings etc. These

settings and more can be accessed after installation through the configuration manager.

The first menu is the

language menu

Here the user is able to set a language.
This language is then used by the entire system. Also the user is able

to proceed to the next menu.
Select a desired language by using the touch screen.
Use the

Up/Down

buttons to scroll through the list of available lan-

guages.
Then confirm the selected language to be set by pressing the

Apply

button.



Press the

Next

button to proceed to the next menu.

Summary of Contents for IsoMatch Tellus Go


























































































Search results

Summary of Contents for IsoMatch Tellus Go

Reviews:

Related manuals for IsoMatch Tellus Go

Brands by name

Popular brands

Kverneland IsoMatch Tellus Go, Manual

Search results

Summary of Contents for IsoMatch Tellus Go

Reviews:

Related manuals for IsoMatch Tellus Go

Brands by name

Popular brands