17
Maintenance and Troubleshooting
17
Adjusting skids and roller height
- Loosen the front support screws and nuts
without
disassembling
them,
then
disassemble the rear screws and nuts
(On both sides)
- Choose the favorite working position
between the 3 choices (See figures
below)
- Then assemble the rear screws and
nuts in the chosen position and tighten
them all (Including the front ones)
Upper position
40 mm cutting
height
Intermediate position
80 mm cutting
height
Lower position
120 mm cutting
height
Front support
screw and nut
Rear support
screws and nuts
NOTE
- For further information
concerning the cutting height,
see page Nr.6 of this manual