manualshive.com logo in svg

Kverneland Enduro, User Manual

Share
Download
Kverneland Enduro User Manual Download Page 13

Security

13

Uncoupling

There is a serious risk of injury when uncoupling the machine from the 
tractor. Therefore :

Immobilise the tractor,

never position yourself between the tractor and the machine during 
uncoupling,

operate the tractor’s hydraulic lift slowly and carefully,

ensure that the ground on which the machine is resting is flat and 
sufficiently stable,

connect or disconnect the hydraulic connectors to/from the 
tractor’s hydraulic system, when the tractor/machine assembly is 
no longer pressurised.

Hydraulic system

The hydraulic system is pressurised.

When connecting the hydraulic system, make sure that the tractor 
system and tool are not pressurised.

Connect the hydraulic system, following the instructions in the 
manual. Colour code sockets, so as to prevent incorrect connections 
(inverting functions could cause an accident).

Before doing any work on the hydraulic system, lock the hydraulically 
controlled folding extensions in the rest position, bleed out the 
pressure and switch off the tractor engine.

Summary of Contents for Enduro




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands