Kverneland CLC Evo User Manual Download

Page: 38 / 86

Safety

Unhitching

Hydraulic system

The hydraulic system is pressurized.

When connecting the hydraulic system:



Ensure that the hydraulic systems of both the tractor and machine
are not pressurized.



Connect the hydraulic system, following the instructions in the user
manual.



Identify the connectors using the color code to avoid incorrect
connections (inverting the functions could cause accidents).

Before any intervention on the hydraulic system:



Lock the folding extension and all the hydraulically controlled
accessories in rest position.



Reduce the pressure.



Turn off the tractor engine.

Other instructions

Beyond the above instructions, ensure compliance with the following:

•

accident prevention instructions,

•

widely accepted safety rules, workplace safety prescriptions and
guidelines in effect regarding road safety,

•

instructions indicated in use, maintenance and service manuals.

DANGER

Heightened risk of injury when uncoupling the machine.

To avoid injury:



Immobilize the tractor,



lower the machine,



engage the parking brake,



make sure that the machine is on flat and sufficiently stable
ground.



operate the tractor hydraulic lift slowly and carefully,



connect or disconnect the hydraulic connectors to/from the
tractor hydraulic system only when the tractor/machine
assembly is no longer pressurized.

Summary of Contents for CLC Evo























































































Search results

Summary of Contents for CLC Evo

Reviews:

Related manuals for CLC Evo

Brands by name

Popular brands

Kverneland CLC Evo, User Manual

Search results

Summary of Contents for CLC Evo

Reviews:

Related manuals for CLC Evo

Brands by name

Popular brands