Kverneland A136138200 User Manual Download

Page: 66 / 74

Troubleshooting

Troubleshooting IsoMatch Grip

Failure

Possible cause

Solution

Connected implement does

not appear in the Implement

Selection.

Implement is not properly connected.



Check cable connections.

Implement is not ISOBUS compatible.



Check ISOBUS compati-

bility of the implement.

Alarm warning: UT version 3

or higher is required.

No UT version 3 or higher is found.



Check with the help of

the



Presetting screen

the UT version (not se-

lectable on IsoMatch Tel-

lus GO and PRO).



Reboot the terminal after

changing UT version.

Alarm warning: No UT in-

stance 1 (0) found.

UT instance 1 (0) is required.



Check with the help of

the



Presetting screen

the UT instance.



Reboot the terminal after

changing UT instance.

Summary of Contents for A136138200










































































Search results

Summary of Contents for A136138200

Reviews:

Related manuals for A136138200

Brands by name

Popular brands

Kverneland A136138200, User Manual

Search results

Summary of Contents for A136138200

Reviews:

Related manuals for A136138200

Brands by name

Popular brands