Kverneland a-drill Operating Manual Download

Page: 71 / 115

Delivery and assembly

Mounting kit for

hopper only

This kit is designed to facilitate the installation of the seed drill on your

machine. It includes the following elements:

•

The hopper.

•

The adaptation plate for your machine.

•

25 metres of hose.

•

A set of 8 deflectors.

The following equipment is optional:

•

A set of 3m00 hydraulic hoses.

•

A set of 11m00 hydraulic hoses.

•

The tractor speed information cable.

•

The radar.

•

The control box 3.2.

•

The control box 5.2.

Installing the seed drill



Install the hopper fixing plate (A) on your machine.



Turn the hopper so that the hoses come out from the front of the

machine.



Place the hopper on the support.



Align the fixing holes.



Place the 14 screws M12x30.



Bolt all to the recommended tightening torques.



Position the spreaders on your machines.



Connect the distribution hoses to the spreaders.

Installing the hydraulic

blower

In order to supply oil to the hydraulic blower :



Connect a hose to the T outlet (A) located on the seed drill

hydraulic unit.



Connect this hose to the free return socket located on the tractor.



Connect another hose to the P outlet (B) located on the hydraulic

unit.



Connect this hose to the single effect distributor socket located on

the tractor.



Attach the hoses to the central machine frame using clamping

rings.

Summary of Contents for a-drill




















































































































Search results

Summary of Contents for a-drill

Reviews:

Related manuals for a-drill

Brands by name

Popular brands

Kverneland a-drill, Operating Manual

Search results

Summary of Contents for a-drill

Reviews:

Related manuals for a-drill

Brands by name

Popular brands