Kverneland a-drill Operating Manual Download

Page: 65 / 115

Delivery and assembly

Mounting the hopper

Procedure



Turn the hopper so that the hoses come out from the front of the

machine.



Place the hopper on the support.



Align the fixing holes.



Position the 10 screws M12x80 (A) on the sides of the support.



Place the 4 screws M12x30 (B) at the front and rear of the support.



Fix all to the recommended tightening torques.

Mounting the

walkway

Task description

The seed drill is accessed from the rear of the machine via the stairs

and the walkway. Adjustments to the seed drill are carried out either

by the walkway or on the ground by the rear of the machine.

Procedure



Mount the walkway on the hopper support.



Position the 4 screws M16x40 (A) in the holes provided.



Place the nuts M16 on the screws.



Install the 2 guardrails.



Position the 8 brackets (B) in the holes provided.



Fix the brackets using M8 nuts (C).

Summary of Contents for a-drill




















































































































Search results

Summary of Contents for a-drill

Reviews:

Related manuals for a-drill

Brands by name

Popular brands

Kverneland a-drill, Operating Manual

Search results

Summary of Contents for a-drill

Reviews:

Related manuals for a-drill

Brands by name

Popular brands