Adjustments
101
Manual calibration
The calibration can be carried out without travelling 100 metres (
328’
).
In the main menu of the box, choose the tab “Speed calibration?”.
Press on XX to select this tab.
Choose "Manual".
Press on XX to start the test and begin to advance.
Compare the speed displayed on the box with the tractor display.
Correct the values displayed on the box using the buttons XX and
XX until they correspond to those of the tractor.
Calibration value
If you have already carried out a calibration, but the box has been
reset, follow the procedure below:
In the main menu of the box, choose the tab “Speed calibration?”.
Press on XX to select this tab.
Choose the tab "Calibration value".
Enter the number of impulsions over 100 m (
328’
) obtained during
the previous calibration.
Validate.
Resetting the calibration
This function resets the calibrated value to its factory configuration.
In the main menu of the box, choose the tab
"Speed calibration?".
Press on XX to select this tab.
Choose the tab "Reset the calibration".
Press on XX to validate.
Once the calibration has been reset, the following message is
displayed:
Calibrate
Speed ?
Manual ?
125%
13 km/h
Manual ?
Calibration
Value ?
Calibrate
Speed ?
Calibrate
Speed ?
Calibration
reset ?
Calibration
reset ?
Summary of Contents for a-drill
