Kvaser Memorator Light HS v2, User Manual

Page: 10 / 19

Kvaser Memorator Light HS v2 User’s Guide 10 (19)
PWR
(Green) CAN
(Yellow) ERR FR
(Yellow) ERR
(Red)
Meaning
short flash Receiving CAN messages on the
CAN channel
blink blink The CAN channel is error passive
slow flash slow flash The CAN channel is bus off
short flash Receiving Error frames on the CAN
channel
steady Autobaud successfully completed.
The device is logging to disk.
slow blink (1 Hz) Autobaud in progress
flash steady Error. Using the device as a CAN
interface is not supported by the
hardware.
Table 3: LED indicators: CAN bus status
ERR FR
(Yellow)
Meaning
steady One or both of the FIFOs (ring buffers) are full and are being overwritten
Table 4: LED Indicators: FIFO status
ERR Meaning
constant red, one yellow flash CAN overrun
constant red, two yellow flashes (this error code is not used)
constant red, three yellow flashes Configuration file missing or corrupt
constant red, four yellow flashes Disk error
constant red, five yellow flashes Internal error; please contact support
Table 5: LED indicators: Error conditions
PWR
(Green)
Meaning
steady Autobaud successfully completed. The device is logging to disk.
Table 6: LED indicators: Logging status
PWR
(Green) CAN
(Yellow) ERR FR
(Yellow) ERR
(Red)
Meaning
“Running lights” on all LEDs The device is communicating with the tool
blink Disk activity such as formatting
Table 7: LED indicators: When connected to Kvaser Memorator Tools
Kvaser AB, Mölndal, Sweden — www.kvaser.com