Kvaser BlackBird Getting Started Guide
16 (47)
5.3.2
Multiple APs in a network
You will notice that the same network is listed more than once if you have multiple
APs within range. You can identify a specific AP on a network by selecting the
network and noting the MAC Address shown in the right pane. Multiple APs within
a single network may also use different channels. The current channel is also
shown in the right pane.
Normally you will be connected to the AP with the strongest signal strength within a
given network. You may override this by manually selecting which channel to use
on the Configuration Tab.
5.4
Setting WLAN keys and security
On the Configuration tab you now have a valid SSID, a correct Operational Mode
and Channel setting. In order to connect, you also need to specify the Encryption
key used by the network. This is done on the Security tab.
Figure 13: Security tab in Kvaser Wireless Configuration.
Kvaser AB, Mölndal, Sweden — www.kvaser.com
