5
/
18
5
DVB Streamer User Manual 1.00
3.
Getting connected
3.1.
Connecting to the embedded web site
1.
Connect the Ethernet cable between the RJ45 and the network..
2.
Open a Web browser (Mozilla ,Internet Explorer, …) and enter the encoder’s IP address ( Default:
192.168.2.3)
you just set in the previous step. Log in with the default username and password
(admin/admin). The home page of the embedded web site is displayed:
NOTE:
Your computer should have IP address which is in the same network.
3.2.
Front panel
POWER
– Indicates that power supply is available.
LAN
– Indicates LAN connection ON/OFF.
LOCK
– Demodulator lock indicator
STREAM
- Indicates streaming of MPEG TS data
IN A
– RF input A
IN B
– RF input B
3.3.
Back panel
Micro SD – 2GB containing configuration
LAN – Ethernet connection
12V – Adapter input
