26
|
41
RGBY Laser Projectors - v170120
Kvant Lasers s.r.o.
EN
How to control
Yellow colour
6
To control Yellow colour on RGBY Projector there are two ways. Below is described which should be used.
• FB4 is built into every RGBY Projector, FB4 has 6 color outputs. Red, Green, Blue, Magenta, Yellow, Cyan.
Normally these 6 color outputs can be controlled only when FB4 is in „Beyond/QS mode” and when Beyond
software is used to operate laser projector (Advanced Mode).
• If FB4 is in „Beyond/QS mode” and QuickShow software is used to operate laser projector, only R, G and B
colors (signals) are used. (Use Colour Balance display mode).
• ILDA Input of FB4 is using only 3 input colors. Red, Green and Blue. Normally when FB4 is in „ILDA Input“
mode, it is not possible to control all 6 color outputs. (Use Colour Balance display mode).
• DMX, Art-Net or Autoplay. For standard frames on SD card also only R, G and B colors can be controlled. (Use
Colour Balance display mode)
