Kval MLX, Operation And Service Manual

Page: 39 / 144

Operator’s Station and Controls on the MLX
2-9
KVAL MLX Operation/Service Manual
Mechanical Controls on the Operator Station
The figure below describes the mechanical controls on the
Operation Station
.
The indicator lights will illuminate according to the Door Job type that is in process.
About the Foot Pedal
The
Foot Pedal
contains manual controls to clamp and extend the
door stops.
C
ontrol Circuit: Powers up and down the
entire machine. See “Powering Operations
for the MLX” on page 2-16.
E-Stop:
Press to STOP all functions of
machine inc case of emergency. See “About
Emergency Stops” on page 2-18.
Start/Stop : Starts or Stops the machining
process: See “Summary of Machining a
Door” on page 2-12.
Cut Type Indicator: Shows the type of cut
being processed. (Lock or Hinge).