How to Enter Calibration Data
4-7
KVAL Commander III Operation Manual
About Restore Points
Restore Points can be created to store a calibration point for recall.
Enter a Positive or Negative Number?
Determine when to enter a positive of negative number by using your
Left Hand
. Use the cut on
the door as a reference. Hold out the left hand with the first finger pointed at the
door cut
, second
finger and thumb at right angle to each other. The first finger represents the
positive
direction of
the ‘Z” axis, the thumb represents the
positive
direction of the ‘Y” axis, then second finger rep-
resents the
positive
the direction of the ‘X’ axis.
Axis Direction for Front Section
FIGURE 4-6.
Left Hand Rule Front Section
To create a Restore Point:
1.
Select the
Restore Points
button
2.
Select the
Save Current
button from the pop-up window
save current calibration
3.
Name and enter to save
To Load or Delete a Restore Point:
1.
Select the restore point from the menu
2.
Select the
Load
button to use the calibration. Select the
Load
button to load
3.
Select the
Delete
button to delete the point.
Y-
X Axis Positive
movement
Z Axis Positive
movement
Y Axis Positive
movement
Z -
X -
Y +
Z +
X +
In-Feed
Summary of Contents for Commander III
