Summary of the Controls on the Machine Line
3-7
KVAL 990-FX Operation Manual
Summary of the Controls on the Machine Line
This section describes the controls located on the machine line.
About the Operator Station
FIGURE3- 7.
System Operator Station
Touch Screen Interface:
Main Control of the
990-FX
. Auto load
and run predetermined parameters on
doors. Manually control the door path
and process through the line. Machine
diagnostics are included, as well as
internet support and connectivity for
remote support via our Service Support.
Main Control Panel:
Power -Up and Power Down machines. Start
and stop the door process.
