Backsection Group
Set or displays the lock parameters, in the
Backsection
group. The settings include lock
specifications for 3 lock settings, the ability to
enable and disable
lock bore, bolt drill,
and function drill face plate routing NS.
Lock (#1-3):
Displays the position of the lock measured from the top of the door.
Lock Bore:
Press the
Lock Bore
button to enable or disable the Lock Bore
Bolt Drill:
Press the
Bolt Drill
button to enable or disable the Bolt Drill.
Face Plate:
Press the
Face Plate
button to enable or disable the Face Plate.
Lock Backset:
Indicates the backset distance for the each downloaded preset.
Fast Plate Routine:
Select to toggle to rout face plate.
Auto Enable and Disable Buttons
From these buttons you can toggle auto functions on or off.
Auto Feed:
Press
Auto Feed
to toggle the auto feed on or off. In auto
mode the feed system will bring in and clamp a door, wait for process-
ing to complete, then feed the door to out.
Feed Through:
Press
Feed Through
to toggle the feed through on or
off. In feed through mode, the door will pass through the machine
without processing.
Auto Width:
Press
Auto Width
to toggle the auto width on or off. In
auto width mode, the machine will automatically set the width adjust
system for optimum clamping.
Auto Unclamping:
Press
Auto Unclamping
to toggle auto Unclamping on or off. The
auto unclamp button sets the machine to automatically unclamp the door after machin-
ing is completed.
For manual operation,
see “Width Adjust Group” on page 2-38.
Main Screen
2-35
990-HQ Operation Manual
