Kval 990-H, Service Manual

Page: 13 / 104

Overview of the 990-H Door Hanging System
1-5
KVAL 990-H Service Manual
About this Manual
This manual is one of two manuals. The set includes this
Operation Manual
and
Service Man-
ual.
The Operation Manual is directed toward operators of the machine. It includes identification of
machine assemblies, power-up and power-down steps, operation and using the user interface.
The Service Manual is directed toward qualified service technicians. It includes maintenance and
troubleshooting information.
TABLE 1.
Title Part Number
990-H Service Manual
137_
SRVDOC
_990H
Corner Square Feature Adds automatic corner squaring to the hinge rout-
ing sequence, and fastening of square hinges.
Price includes replacing x,y,z motion air cylinders
on each of the hinge router head with ball screws
and AC servo motor (9 total), as well as corner
square chisel assemblies. The servo motor
sequencing will add approximately 3-4 seconds to
all hinge sequences including standard radius
hinges. Adding corner squaring will add approxi-
mately 6 seconds more. 10 seconds extra overall
is estimated for a square hinge door unit (door and
jamb). Automatic adjustment between 100mm and
89mm hinges is included with a touch screen
selection, although hinge location centerlines
remain the same.
Custom lock locations in
Millimeters Ability to enter custom lock location in millimeters
using the touch screen for special doors. This will
reference the in-feed door stop
Option Title Description