About the Main Screen
KVAL 990-F4 Operation Manual
2-34
Preset Buttons
Pressing a preset button, calls one of twelve presets stored in memory. Pressing the
Mod
-
ify Preset
button allows the operator to store the active
Main Screen
parameters. After
pressing the
Modify Preset
button:
1.
Select one of the buttons in which to save the parameters
2.
Name it to an appropriate label.
3.
Select the save button to save to memory.
Door Specs
Set the parameters for the door in the
Door Spec
group.
The settings include:
•
Preset in Use:
displays if preset parameters are being
used or custom (manual settings) are being used.
•
Door Thickness:
Choose the desired door thickness
settings.
•
Door Length:
Choose desired the door length settings.
•
Door Handing:
Displays the hand of the door.
Hinge Specs
Set the parameters for the hinges in the
Hinge Spec
group. The settings include:
• Yellow Enable/Disable button for
Hinge
. Press Button
to toggle
both Predrill and Hinge
ON or OFF.
• Enable/Disable button for
Hinge 2
. Press Button to
toggle
Hinge 2
ON or OFF.
• Enable/Disable button for
Predrill
. Press Button to tog
-
gle the
Predrill
ON or OFF.
•
Hinge Length:
Choose the desired hinge length.
•
Hinge Bevel:
Choose between 0 degree or 3 degree bevel.
•
Shift Into Pocket and Shift Out of Pocket:
Choose to move Carriage Head into machin
-
ing mode or out of the machining mode.
