SMART 650 Quick Reference Guide
Part # 006-9009-10 Rev 0
UP and DOWN User Interface Buttons:
Used to move between modes and to increase/decrease values.
SELECT User Interface Button:
Used to select modes and to set values.
OVERSPEED
Mode Indicator
OVERSPEED Indicator:
Illuminated whenever a target speed is greater than or equal to either of the overspeed
settings. Blinks when in overspeed changing mode.
BLANKING
Mode Indicator
BLANKING Indicator:
Illuminated whenever a target speed is greater than or equal to the blanking speed setting.
Blinks when in blanking speed changing mode.
VOLTAGE LEVEL
Mode Indicator
VOLTAGE LEVEL MENU Indicator:
Illuminated when the system voltage is being displayed. Blinks when in system menu or
changing options settings.
CLOCK
Mode Indicator
CLOCK Indicator:
Displays the current date and time of the sign. Blinks when changing date and time values.
Display Window:
Displays the current target speeds. It can also be used to view and change the system
settings. The rightmost decimal point is the Power LED which should constantly blink to
indicate the system is
running. “
nc
” indicates the communication to the radar has been lost.
Changing Settings:
OVERSPEED 1
(Blinking Digits)
SETTING
To change the Overspeed1 setting, using user interface buttons:
1. move to the
OVERSPEED
LED →
SELECT
→
2.
move to “
OS1”
→
SELECT
→
SELECT
→
3.
choose new value →
SELECT
OVERSPEED 2
(Flashing Strobes)
SETTING
To change the Overspeed2 setting, using user interface buttons:
1. move to the
OVERSPEED
LED →
SELECT
→
2.
move to “
OS2”
→
SELECT
→
SELECT
→
3.
choose new value →
SELECT
BLANKING SPEED
SETTING
To change the Blanking Speed setting, using user interface buttons:
1. move to the
BLANKING
LED →
SELECT
→
2.
choose new value →
SELECT
DEMO MODE
To engage the demonstration mode, using user interface buttons:
1. move to the
VOLTAGE LEVEL
LED →
SELECT
→
2.
move to “
dE”
→
SELECT
→
3.
choose “
On”/”OFF”
→
SELECT
STEALTH MODE
To engage the stealth mode, using user interface buttons:
