manualshive.com logo in svg

Küschall KSL, User Manual, Page: 14 / 48

Share
Download
Küschall KSL User Manual Download Page 14

The KSL

Active Brake

1.

To engage the brake, pull the brake lever forwards
beside or between your knees as far as possible.

2.

To disengage the brake, push the brake lever backwards
beside or between your knees.

Light active Brake

CAUTION!
Risk of pinching or crushing

Do not grasp the brake mechanism with the full
hand when engage or disengage the brake.

1.

To engage the brake, pull the brake lever backwards
with the palm against the tyre as far as possible.

2.

To disengage the brake, push the brake lever forwards
with the hand edge.

3.5 Backrest

WARNING!
Risk of injury to the assistant and damage to
the wheelchair

Tilting the chair with a heavy user can hurt the
assistant's back and damage the chair.

– Make sure to be able to safely control the

wheelchair with a heavy user before performing
a tilting maneuver.

Standard Backrest Cover

A standard backrest cover is available for all backrest
types. These covers are not adjustable.

WARNING!
Risk of tipping

If the standard backrest cover become slack, the
tipping point of your wheelchair is changed for
the worse.

– Slack standard backrest cover must be replaced

by a qualified technician.

14

1659269-C

Summary of Contents for KSL

















































Reviews:

No comments