Repairing or changing an inner tube
1.
Remove the rear wheel and release any air from the
inner tube.
2. Lift one tire wall away from the rim using a bicycle tire
lever. Do not use sharp objects such as a screwdriver
which could damage the inner tube.
3.
Pull the inner tube out of the tire.
4. Repair the inner tube using a bicycle repair kit or, if
necessary, replace the tube.
5.
Inflate the tube slightly until it becomes round.
6. Insert the valve into the valve hole on the rim and
place the tube inside the tire (the tube should lie right
round the tire with no creases).
7.
Lift the tire wall over the edge of the rim. Start close to
the valve and use a bicycle tire lever. When doing this,
check all the way round to ensure that the inner tube
is not trapped between the tire and the rim.
8. Inflate the tire to the maximum operating pressure.
Check that no air is escaping from the tire.
Spare parts
All spare parts may be obtained from a küschall
specialist dealer. A current list of spare parts is
available on the internet at www.kuschall.com.
8.3 Cleaning
Your wheelchair will serve you well for many years if you
clean it regularly.
IMPORTANT!
Sand and seawater can damage the bearings
and steel parts can rust if the surface is
damaged.
– Only expose the wheelchair to sand and
seawater for short periods and clean it after
every trip to the beach.
IMPORTANT!
– Do not use coarse abrasives, aggressive
cleaning products or high-pressure cleaners.
Never use acids, alkalines or solvents such as
acetone or cellulose thinner.
– Always use ordinary household cleaning
agents.
1.
Clean the cushions and metal parts with a soft, damp
cloth.
2. Dry the wheelchair carefully with a cloth after using
it in the rain.
3.
If the wheelchair is dirty, wipe off the dirt as soon as
possible with a damp cloth and dry it carefully.
1583561-D
49
Summary of Contents for Compact
Page 27: ...Accessories 1583561 D 27 ...
