Removing the rear wheels
1.
Disengage the parking brakes.
2.
3.
With one hand, hold the wheelchair upright.
4. With the other, hold the wheel through the external
spoke rim around the wheel hub.
5.
Using your thumb, press the removable axle button
A
.
Keep it pressed and pull the wheel out of the adapter
sleeve
B
.
Installing the rear wheels
1.
Disengage the parking brakes.
2.
3.
With one hand, hold the wheelchair upright.
4. With the other, hold the wheel through the external
spoke rim around the wheel hub.
5.
Using your thumb, press the removable axle button
A
and hold it down.
6. Push the axle into the adapter sleeve
B
up to the stop.
7.
Release the removable axle button and make sure that
the wheel is secure.
7.4 Transporting the occupied wheelchair in a
vehicle
Even when the wheelchair is properly secured and the
following rules are met, injuries to passengers may occur
in a collision or sudden stop. Therefore küschall strongly
recommends transferring the wheelchair user to the
vehicle seat with the seatbelt on. Do not make alterations
or substitutions to points of the wheelchair (structure,
frame or parts) without the written consent of Küschall AG.
The wheelchair has been successfully tested according to
the requirements of ISO 7176–19.
WARNING!
Risk of serious injury or death
To use the wheelchair as a seat in a vehicle the
backrest height must be at least 400 mm.
To transport the wheelchair with user in a vehicle,
a restraint system must be installed in the vehicle.
Wheelchair tie-downs and occupant restraint systems
must be approved according to ISO 10542-1. Contact
your local Invacare representative or specialist dealer for
more information on getting and installing an approved
and compatible restraint system.
1583561-D
41
Summary of Contents for Compact
Page 27: ...Accessories 1583561 D 27 ...
