Components and their functions
Fitting
1.
Push the side rest into the holder.
Adjusting the height
1.
Loosen the screw
A
of the retaining plate
B
.
2. Move the armrest upwards or downwards until you
reach the desired height.
3.
Tighten the screw
A
.
4. Perform the setting on both sides.
3.9
Simple armrest, height-adjustable,
swivelling, non-locking
WARNING!
Risk of injury
The armrests are not locked and can be easily
pulled out upwards.
– Do not lift or transfer the wheelchair using
the armrests.
– Do not use the armrests for transportation
when carrying the wheelchair up- or
downstairs.
Removing
1.
Raise the armrest and pull it upwards out of the holder.
Fitting
1.
Push the armrest into the holder.
Adjusting the height
1.
Pull the armrest out of the holder.
2. Loosen the screw on the tube of the armrest and
screw it back in at the desired height.
3.
Push the armrest back into the holder.
4. Perform the setting on both sides.
Swivelling
1.
Raise the armrest a little and swivel it outwards.
3.10 Mudguard
In order to prevent dirt from the wheels spraying upwards,
a removable mudguard can be fitted. The position of
the mudguard can be adjusted. The adjustment must be
carried out by a specialist dealer.
1583561-D
17
Summary of Contents for Compact
Page 27: ...Accessories 1583561 D 27 ...
