Küschall Compact FF, Service Manual, Page: 9 / 56

Reconditioning
5 Reconditioning
5.1 Cleaning
IMPORTANT!
– The product does not tolerate cleaning in
automatic washing plants, with high-pressure
cleaning equipment or steam.
IMPORTANT!
Dirt, sand and seawater can damage the
bearings and steel parts can rust if the surface
is damaged.
– Only expose the wheelchair to sand and
seawater for short periods and clean it after
every trip to the beach.
– If the wheelchair is dirty, wipe off the dirt as
soon as possible with a damp cloth and dry
it carefully.
1. Remove any installed optional equipment (only
optional equipment which does not require tools).
2. Wipe down the individual parts using a cloth or soft
brush, ordinary household cleaning agents (pH = 6 -
8) and warm water.
3. Rinse the parts with warm water.
4. Thoroughly dry the parts with a dry cloth.
Car polish and soft wax can be used on painted
metal surfaces to remove abrasions and restore
gloss.
Cleaning upholstery
For cleaning upholstery refer to the instructions on the
labels of the seat, cushion and backrest cover.
5.2 Disinfection
Information on recommended disinfectants
and methods can be found on https://vah-
online.de/en/for-users.
1. Wipe down all generally accessible surfaces with a soft
cloth and ordinary household disinfectant.
2. Allow the product to air-dry.
5.3 Materials
The components used to manufacture Küschall®
wheelchairs consist of following materials:
Frame tubes Aluminum
Backrest tubes Aluminum
Cross struts
Aluminum
Seat cover / Backrest cover PA / PE / PVC
Push handles Aluminum / TPE
Clothes guard / Mudguard
Carbon Fiber or Plastic
Castor forks Aluminum
Legrest
Aluminum
Footrest
Carbon Fiber or Plastic
Supporting parts /
Attachments Steel / Aluminum
Screws and bolts Steel
All components have either a protective coating or are
corrosion resistant.
1659353-A 9